Hytec Electronics Ltd.

VME PG2095 PULSE GENERATOR

Product Description

This 6U module is a Gated (front–panel Inhibit Input) Pulse Generator giving one primary pulse–rate and eight more successively decade–divided outputs. It uses an internal Crystal–controlled 10MHz clock, or an external clock of up to 35MHz. The primary rate is derived from either of these via a Modulo– n divider, where n may be switch–set to any integer from one to sixteen.

With the internal clock this gives 136 spot frequencies from ten million per second to one every 2.7 minutes. Each output goes through a pulse–shaping circuit controlled by a front–panel switch to give Mark/Space ratios of 1 : 1 or 1 : 9 or 500nsec pulse.

Our policy is one of continuous product development and the right is reserved to supply equipment which
 may vary slightly from that described.




Hytec Electronics Ltd
Post : 5 Cradock Road, Reading, Berkshire, RG2 0JT, England.
Phone : +44 (0)118 9757770
Fax : +44 (0)118 9757566

HYTEC HOME PAGE

Copyright © 2004 Hytec Electronics Ltd. All rights reserved.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
Last modified: September 24, 2008