PCG8523

Programmable Clock Generator

IndustryPack®


image



Product Description

The PCG8523 is a single-width Industry Pack with the following characteristics:- This clock generator allows the user to select the frequency of a clock signal which is connected to one of the I/O lines of the IP card. The first five bits in the clock frequency select register are used to select the clock frequencies of 1 Hz to 1MHz in multiples of 1, 2, 5 or 10. (E.g. 0=1Hz, 1=2Hz, 2=5Hz, 3=10Hz and so on to 15=100KHz, 16=200KHz, 17=500KHz, 18=1MHz).
A front panel lemo on all Newwood Solutions IP carrier cards connects to the IP STROBE line of the all the IP cards. This line can be used to start the clock by setting the relevant bit in 8623 the CSR.



PRODUCT SPECIFICATIONS

Size: Single width Industry Pack 1.8ins x 3.9 ins
Operating temp: 0 to 45 deg C ambient
Data format: Binary
Clock rates: From 1MHz to 1Hz in set steps
Input levels: TTL/LTTL compatible with jumper selectable 470Ω resistor pull-up to 5V or 3.3V or pull-down with positive edge clocking
Internal clock: 50MHz
Clock accuracy: +/-50ppm (0.005%)
Power: +5V @ 180mA typical


Downloads


Product Summary

User Manual This link is for the latest version of the IP-PCG-8523 Manual.