SMC86006/2
Reconfigurable FPGA with 48-bit
DIGITAL I/O
IndustryPack®
This is a single-width IP module with user configurable FPGA in the form of a Xilinx Spartan 3 FPGA XC3S200AN-5 with 200,000 system gates, and forty eight channels of buffered digital input/output using the SN74LVCC3245A Octal Bus Transceiver from TI. The 48 digital I/O signals are accessed in groups of 8-bits. Each set of eight signals can be selected to be inputs or outputs. Each of the 48 digital I/O lines has a resistor network which allows a selectable pull up/down voltage of GND, +3.3V or 5V). The unit also has an onboard 50MHz clock oscillator. The FPGA logic is configurable via JTAG plug on the IP card.
XC3S200AN |
|
System Gates |
200K |
Logic Cells |
4,032 |
|
Dedicated Multipliers |
16 |
Block RAM Blocks |
16 |
|
Block RAM Bits |
288K |
|
Distributed RAM Bits |
28K |
|
Flash Size Bits |
4M |
|
User Flash Bits |
2M |
|
DCMs |
4 |
Size: Single width Industry Pack 1.8ins x 3.9 ins
Operating temp: 0 to 45 deg C ambient
Number of input/outputs: 48 (configurable as 6 groups of 8 in or 8 out )
Input level: TTL
Output level TTL 24mA, programmable logic sense high or low true
Input/output termination: 4k7 ohms to 0V, or +3.3V or 5V by jumper selection
Internal clock: 50MHz oscillator Clock accuracy: +/-100ppm (0.01%).
Power: +5V @ 250mA typical
Downloads